Filter
Top Products
6 Smart-UPS XL 3U Rack Mount 2200/3000 VA 120/230 Vac; 3000 VA 100/200 Vac User Manual
Installation
Rear Panels
Rear Panel Features
The UPS features a TVSS screw located on the rear panel for connecting the ground leads on
transient voltage devices.
The UPS is equipped with an external battery connector located on the rear panel of the unit.
Where appropriate use an APC extension battery cable. For ordering details contact your dealer or
APC through the Web site www.apc.com.
120 V models only: The UPS is equipped with a Site Wiring Fault LED located on the rear panel of
the unit. The LED will be illuminated if the UPS is plugged into an improperly wired utility power
outlet, (see Troubleshooting in this manual).
USB and Serial connectors are communication ports.
Use only an APC approved cable to connect to the serial port. A standard serial interface cable
is incompatible with the UPS.
Serial and USB ports cannot be used simultaneously. USB has priority over Serial.
The UPS has a SmartSlot located on the rear panel for adding optional accessories to the unit.
100/120/200 V model circuit breaker and line cord connection.
230 V model circuit breaker and line cord connection.
The UPS is equipped with an emergency power off feature located on the rear panel of the unit.
TVSS
GND
2200/3000 VA 230 Vac
3000 VA 200 Vac
2200/3000 VA 120 Vac
3000 VA 100 Vac
SerialUSB