Filter
Top Products
4 XL Tower/Rack-Mount 5U External Battery Pack User Manual
APC Worldwide Customer Support
Customer support for this or any other APC product is available at no charge in any of the following ways:
• Refer to the APC Web site to access documents in the APC Knowledge Base and to submit customer support
requests.
– www.apc.com (Corporate Headquarters)
Connect to localized APC Web sites for specific countries, each of which provides customer support
information.
– www.apc.com/support/
Global support searching APC Knowledge Base and using e-support.
• Contact an APC Customer Support center by telephone or e-mail.
Local, country-specific centers:
go to www.apc.com/support/contact for information.
Contact the APC representative or other distributor from whom you purchased your APC product for information on how to
obtain local customer support.
Installation
The unit is shipped in tower configuration.
Tower configuration
Rack-mount configuration
This unit is intended for mounting in a two post rack. To order a four post rack-mount kit contact your dealer or
refer to the APC Web site, www.apc.com.
Tower to rack-mount conversion procedure
The unit and the battery modules are heavy. Remove the battery modules to lighten the unit during installation.
Connect the battery.
After the battery has
been connected, tuck
the battery cables in
between the battery
and the battery door.
This will ensure a
secure fit of the bezel
to the unit.