Filter
Top Products
10
REPLACING THE BATTERY MODULE
To replace the battery module, reverse the directions above for Removing the Front Bezel and Bat-
tery Module.
Disconnecting the Battery for Transport
Always DISCONNECT THE BATTERY before shipping in compliance with U.S.
Department of Transportation (DOT) regulations.
The battery may remain in the UPS; it does not have to be removed.
1. Shut down and disconnect any equipment attached to the UPS.
2. Shut down and disconnect the UPS from the power supply.
3. Unplug the battery connector
(rear panel).
For shipping instructions and to obtain appropriate packing materials contact APC at the web site,
www.apc.com/support/contact
.