Filter
Top Products
Power Mac G4 Cube ATA Hard Drive -
5
5 Push in the core latch, and reposition the computer chassis so you can
access the heatsink and hard drive.
6 Loosen, but do not remove, the three captive screws at the heatsink.
7 Lift up the loosened heatsink, and slide the hard drive out of the carrier.
Installing the Replacement Drive
1 Position the replacement drive on the drive carrier so that the ribbon
cable and power cable connectors align with the slots at the end of the
carrier.
2 Lift up the heatsink, and slide in the drive.
3 Align the heatsink fins to the opposite heatsink fins. Tighten the three
captive screws.
Screws
Hard Drive
Heatsink