Filter
Top Products
Mac Pro Hard Drive Carrier 4
Remove the four screws that mount the drive to the carrier and remove the drive from the
carrier.
Important: When removing or installing a hard drive, hold the drive by its sides. Be careful not to
touch the printed circuit board on the bottom of the drive.
Installing the Replacement Hard Drive Carrier
Position the replacement hard drive carrier on the hard drive and secure it with the four
mounting screws.
Slide the carrier and drive over the guides and into the drive bay, until you feel the drive
snap into place.
Closing the Computer
Replace the access panel.
Note: Make sure the latch is in the up position before replacing the access panel. If the latch
is down, the access panel will not seat correctly in the enclosure.
Push the latch down to close and secure the access panel.
Warning: Never turn on the computer unless all of its internal and external parts are
in place and it is closed. Operating the computer when it is open or missing parts can
damage it or cause injury.
4.
1.
2.
1.
2.