Filter
Top Products
2Attach one end of the video cable to the Video In port on the VCR.
Follow the directions that came with the VCR.
3Plug the other end of the video cable into either the S-video output port (
Æ
) or the
composite video output port (
Â
) on the Macintosh.
If the connector doesn’t slide easily into the port, realign it and try again.
Don’t use force, which could damage the computer or cable.
4Plug the dual RCA plugs on the audio cable into the left and right Audio In ports on
the VCR.
5Plug the RCA connectors on the audio cable into the left and right audio input ports (
-
)
on the Macintosh.
Depending on whether your equipment has S-video or composite video
(RCA-type) ports, your finished connections should look like one of the
following:
S-video connection for output from the computer
S-video output
port
Audio output
ports
(left and right)
S-video In
port
Audio In ports
(left and right)
Dual RCA-plug cable
(available at most electronics supply stores)
VCR
fi
-
S-video cable
55
Connecting Additional Equipment