Filter
Top Products
which is inserted in the TEXTOOL. and hit RETURN
SET MASTER ROM
please do it, or you already have cone just hit RETURN, COMPARE OK!
or
COMPARE ERR!! CONTINUE ? (Y/N)
Just key in “Yes” for continue or “No” to Stop it.
If you want to compare two or more EPROMs, the first step is to read data from
eprom t.o the memory location of
your system as READ function and then set another eprom
as master rom and do COMPARE function.
5) BLANKCHECK: To test EPROMS is blank or riot. please key
in “5” and then you will see the follows on the screen:
SET BLANK ROM
Please insert the EPROM you want to test and hit
RETURN:
ROM CHECK OK! (If the EPROM is blank.)
or
EPROM CHECK ERR!! (When the EPROM is not blank.)
6) MONITOR: To enter the Apple machine language when you
type “6”. You can examine, change, move, compare
and run the contents of memory in machine language.
Please refer the Apple reference manual for more
details.
Problems and Solutions: After using AP-64e EPROM WRITER, you will find out so many
advantages such as faster, portable and
more reliable. But some problems will come to bother you too. Hereafter we like to point
out problems may be occurred and
show you how to settle.
1. The EPROMs can not be programmed: Since the EPROMs which
could be already stored program, you can't write any
more, except you erase and program again.
2. If you forget to key in ROM SIZE (represented by 2,4,8)
the errors could be occurred when you use WRITE, READ,
COPY functions, please reset your computer and
boot AP64e again.
3. Don’t forget to turn the switch off when you use AP-64e
from cold start or when screen indicate you “SW OFF”.