Filter
Top Products
Power Mac G5 Hard Drive Guide Screws -
7
3. To replace the top drive, make sure the guide screws align with the middle slot of the
drive bay, and then gently push the drive into the bay until it snaps into place in the top
position.
(Figure 8)
Figure 8
4. To replace the bottom drive, align the guide screws with the bottom slot of the drive
bay and slide the drive in until it snaps into place.
5. Connect the drive power cable and the data cable to the top drive.
6. Rotate the drive locking tab down to secure the drive.
7. Repeat steps 4–5 for the bottom drive.