Filter
Top Products
IT
ECO
Blue
Angel
TCO '03 ECMA
Yes No
Not
rel.
('02)
Desktop
CPUs
Desktop
Display
(6/99)
1
1.1
The manufacturer has a documented environmental policy approved
by the management.
X C3.1 5.1
1.2
The manufacturer has an environmental management system
according to: ISO 14001 ___, EMAS ___ or internal system X
X C3.2 5.1
1.3
The manufacturer regularly publishes an environmental report. X C3.3 A.6.1
1.4
The ISO/EMAS certification authority shall be accredited in
accordance with ISO/IEC Guide 66, and shall meet the provisions of
ISO/IEC Guide 61
X
A.6.1
1.5
TCO-prepared Document to accompany product X A.1.1
1.6
A document specifying how the TCO Document shall accompany
the product, signed by the responsible person on behalf of the
applicant company shall be submitted
X
A.1.1
2.0
Environmentally conscious design
2.1
Large mechanical plastic parts consist of one material or of
materials that are easy to separate.
X P6.3 5.9
2.2
All plastic components that weigh >100g shall be made from no
more than 2 types of plastic materials, regardless of their location in
the product.
X P6.3
A.6.3.3
2.3
The variety of materials forming components of comparable
functions are limited to one material.
X
B.1
2.4
The proportional use of recyclate is permitted. X B.5
2.5
All mechanical plastic parts, heavier than X 25 g / __50 g have
material codes according to ISO 11469 (version 1996)) or All
mechanical plastic parts, heavier than X 25 g / __50 g have
material codes according to ISO 11469 (version 2000; addition of
ISO 1043, parts 1-4 Plastics-Symbols and abbreviated terms)
X
P6.4,
6.5,
6.15
3.1.3 A.6.3.1 5.9
2.6
The coating of plastic components is limited to a minimum X B.3
2.7
No internal or external metallization or molded-in or glued metal
parts in the plastic housing shall be used
X
A.6.3.4
2.8
Plastic parts are free from metal inlays that cannot be removed by
one person alone with a standard tool
X P6.6
2.9
Labels should be inherent and separable for recycling X P6.7
2.10
Components made of incompatible materials can be removed
separately or via separation aids
X
A.1
2.11
Connections to be separated during disassembly are easily
traceable
X
A.3
2.12
Connections to be separated during the disassembly of Flat Panel
Display must be easy to take apart in order to not damage the
mercury lamps. This means that gluing and welding must not be
used to bond parts and make removal of the lamps complicated.
X
A.6.3.2
2.13
The product is designed for easy dismantling during recycling.
Gluing/welding of different materials has been avoided
X P6.1
3.1.1
2.14
Disassembly can be done exclusively with all-purpose tools X A.4
2.15
Disassembly can be done by a single person X A.9
2.16
All screwed connections between modules can be separated with
no more than three tools
X A.7
2.17
Large-size plastic case parts are so designed as to ensure the
reutilization of the plastics on the basis of existing technologies for
the production of high-quality and long-lived plastic products
X
3.1
2.18
Materials and material compounds can be recycled on an industrial
scale (technologically and economically useful)
X
B.4
APES
(Apple's Product Environmental Specifications)
Requirement
met
Environmental policy & environmental management
2