Filter
Top Products
31
3M
™
Multimedia Projector MP7730
© 3M IPC 2000
Resetting the Lamp Hours
Please do the following within 10 minutes from turning power on if you replace the lamp after 1500
hours.
1. Press the Exit button on projector or remote control for three seconds to display the total used lamp
time.
2, Press MENU button on projector or remote control during the lamp hour message. Then an
adjustment message will appear.
3. Press or to select the setting. To select the default setting, select “Reset” (or “Cancel” to
return to the default setting).
4. Press EXIT to leave.
Maintenance