Filter
Top Products
Xserve Optical Drive Bracket -
5
Installing the Replacement Optical Drive Bracket
1. Install the replacement bracket on the drive, securing it with the two screws from the
original drive or the screws included with the replacement bracket.
2. Align the corner of the replacement drive with the two guides in the chassis and press
the drive down until you hear it snap into place.
(Figure 6)
3. Reconnect the optical drive cable to the drive.
Figure 6
Closing the Server
1. Carefully slide the bottom housing back into the rack.
2. Tighten the front thumbscrews to secure it.
Warning: Never turn on the server unless all of its internal and external parts
are in place and it is closed. Operating the server when it is open or missing
parts can damage it or cause injury.