Filter
Top Products
4
- iMac (Slot Loading)
6 Touch the metal shield that is visible inside the recessed latch area
before touching any components on the main logic board. This helps
protect the computer from damage caused by electostatic discharge.
Important:
To avoid electrostatic discharge, always ground yourself by
touching the port access covers before you touch any parts or install any
components inside the computer. To avoid static electricity building back up
in your body, do not walk around the room until you have completed your
installation and closed the computer.
7 Disconnect the power cord from the computer.
8 Remove the SDRAM DIMM from its static-proof bag, taking care not to
touch the gold connectors or chips.
Note:
Insert the memory module into one of the two slots, whichever is
open.