Filter
Top Products
8e6 ThreaT analysis reporTer Quick sTarT Guide 35
Step 2: Wizard Setup Procedures
For this step, you will need your network administrator to provide you the following infor-
mation:
IP range and netmask of machines on the network the Threat Analysis Reporter
server will be monitoring
R3000 IP address, port number to be used between the R3000 and Threat Analysis
Reporter, and type of authentication method to be used (IP group or LDAP)
8e6 Enterprise Reporter server IP address and server name, if an ER unit is con-
nected to the R3000
Access the Threat Analysis Reporter Administrator Console
A. Launch Internet Explorer.
B. In the address eld, type in http://x.x.x.x:8080/8e6tar/wizard.html (in which “x.x.x.x”
represents the eth0 IP address entered in the Connect Network Interface screen
of the Step-by-Step Initial Setup Procedures). In our example, this entry would be:
http://200.100.10.10:8080/8e6tar/wizard.html.
C. Click Go to open the Threat Analysis Reporter interface and the EULA Agreement
dialog box:
•
•
•