Filter
Top Products
11
3.2.2 Aruba AP-124 TEL Placement
This section displays all the TEL locations on the Aruba AP-124. The AP124 requires a minimum of 3
TELs to be applied as follows:
3.2.2.1 To detect opening of the chassis cover:
1. Spanning the left chassis cover and the top and bottom chassis covers
2. Spanning the right chassis cover and the top and bottom chassis covers
3.2.2.2 To detect access to restricted ports
3. Spanning the serial port
The tamper-evident labels shall be installed for the module to operate in a FIPS approved mode of
operation.
Following is the TEL placement for the Aruba AP-124:
Figure 1: AP-124 Front view