Filter
Top Products
M a k ing Netw ork ing Simple
FCC Compliance Stat emen t
This hardware device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause
undesired operation. This equipment has been tested and
found to comply with the limits
for a Class A computing device in accordance with the specifications in Subpart B of Part
15 of FCC rules,
which are designed to provide reasonable protection against such
interference in a residential installation. However, there is no guarantee that
interference will not occur in a particular installation.
If you suspect this equipment is causing interference, turn your unit on and off while your
radio or TV is showing interference. If the interference
disappears when you turn the unit off
and reappears when you turn the unit
on, something in the unit is causing interference. You
can try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna;
2. Increase the separation between the equipment and the receiver;
3. Connect the equipment to an outlet on a circuit different from that to which the receiver
recei
ver is connected;
4. Consult the place of purchase or an experienced radio/television
technician for additional
suggestions.
Any changes or modifications not expressly approved by the party
responsible for
compliance could void the user’s authority to operate the equipment.
Safety Advisory
1. This product should be operated from the type of power source indicated on the
marking label. If you are not sure of the type of power available, consult your dealer or
local power company.
2. Do not allow anything to rest on the power cord. Do not locate this product where
persons will walk on the cord.
3. Never push objects of any kind into this product through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electric
result in a risk of fire or electric shock. Never spill liquid of any kind on the product.
4. Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage points or other risks. Refer all servicing to service
personnel.