Filter
Top Products
1.4 Management and Configuration
The switch is managed using Command Line Interface (CLI) in order to access several different command modes.
Entering a question mark (?) at each command mode’s prompt provides a list of commands.
1.4.1 Console Interface
Support for local, out-of-band management is delivered through a terminal or modem attached to the EIA/TIA-232 or
USB interface. You can access the switch by connecting a PC or terminal to the console port of the switch, via a
serial cable. The default password set on the console line is Asante (it is case-sensitive). The default IP address is
192.168.0.1/24.
Remote in-band management is available through Simple Network Management Protocol (SNMP) and Telnet client.
When connecting via a Telnet session (line vty0), the default password is also Asante (case-sensitive).
See Chapter 2 for more information on connecting to the switch.
9 Asante IntraCore IC36240 Setup Guide