Filter
Top Products
13
Connecting a video device
Standard video connections
Plug the video cable into the video-out connector on the video device. Plug
the other yellow connector into the yellow Video 2 connector on the projec-
tor.
Plug the white connector of the audio adapter into the left audio out con-
nector on the video device and plug the red connector into the right audio
out connector on the video device.
Plug the audio cable into the other end of the audio cable adapter and into
the audio in connector on the projector.
Connect the black power cable to the connector on the back of the projector
and to your electrical outlet.
NOTE: Always use the power cable that shipped with the projector.
Optional video connections
If the video device uses a round, four-prong S-video connector, plug an
S-video cable (sold separately) into the S-video connector on the video
device and into the S-Video 1 connector on the projector. Use the audio con-
nectors as described directly above.
To connect a progressive scan EDTV or HD source, use the Component to
M1 adapter (sold separately).
connect video and audio cables
connect power cable
connect S-video and audio cables