Filter
Top Products
USER GUIDE LCD PANEL
8
4.1 COMPUTER
Connect the LCD panel, computer, monitor and power supply as shown in
the rear foldout.
Connect cable (2) between the LCD panel and the computer. Use the Y-
split on the computer end to connect the monitor.
If you have a Macintosh computer, insert applicable adapters (4) and (5)
as shown.
Connect the power supply to the LCD panel (3).
TO SET UP FROM THE REMOTE CONTROL:
STEP OPERATION
1 Press RESET for default settings
2 Adjust TUNE for a stable image. *)
3 Position the image correctly using the four POSITION keys
5 Adjust CONTRAST and BRIGHTNESS as desired
*) If a stable image is not achieved using TUNE, try to adjust the
CONTRAST/BRIGHTNESS setting as described later.