Ask Proxima C300 Projector User Manual


 
USER GUIDE LCD PANEL
12
7 FEATURES
The LCD panel has a variety of different features implemented. This
chapter explains each feature in detail.
DUAL SAFECOOL SYSTEM
The cooling operation is controlled by the overhead projector light (OHP).
This safety feature ensures that the fans are always operating as long as
the OHP is turned on. When the OHP is turned off, the fans automatically
stop to minimize noise. The power supply must be attached to the panel
for the fan to work properly.
SET-UP MEMORY
The user controlled set-up, that usually is done each time the panel is
connected to a new computer, is automatically memorized for future use.
The set-up information is stored in a non-volatile memory approximately 5
seconds after the last key is pressed.
The memory can store 40 different sources/modes. Some sources are
predefined, while the remaining are available for customer set-up of
sources. See the Technical Data section for compatibility.
Custom sources are stored only if their sync pattern differs from any of the
previous selections. The panel automatically selects a new memory
location.
Most settings are stored individually for each mode, including contrast,
brightness, tune etc. See the remote control table above.
VGA TEXT
VGA text is compressed correctly from 720x400 to 640x400 mode when
the image is positioned correctly. The characters maintain their shape, as
every ninth pixel is dropped horizontally between each character.