Aspire Digital 2010 Laptop User Manual


 
43 Chapter 2
Parameter Description
Product Name This field will show product name.
Manufacture Name This field will show manufacturer name.
System BIOS Version This field reports the BIOS version of system.
VGA BIOS Version This field reports the VGA version of the system.
Hard Disk Mode Name This item will show the size of HDD installed on
Primary IDE master. The hard disk size is
automatically detected by the system. If there is no
hard disk present or unknown type, “None” should
be shown on this field.
HDD Serial Number This item allows the serial number of the Hard Disk.
If there is no hard disk present or unknown type,
“None” should be shown on this field.
ATAPI This item will show the model name of DVD/CD-
ROM drive installed on system. The DVD/CD-ROM
model name is automatically detected by the
system. If there is no DVD/CD-ROM model present
or unknown type, “None” should be shown on this
field.
Serial Number This item will show the Serial number of system.
Asset Tag This item will show the Asset Tag number of the
system.
UUID This number only valid when there is an internal LAN
device presents, otherwise, zero will be display in
this field.
System First field reports the model name of processor.
Second field reports CPU Speed.
Insyde Software SCU May 20, 2003
5:40:09 AM
Main Advanced Security Boot Exit
----Devices--------------------------------------------------- -----System------------------------
-
Product Name = Aspire 2010
CPU = Intel® Pentium ® M
Manufacture Name = Acer
CPU Speed = 1600 MHz
System BIOS Version = V1.00
VGA BIOS Version =
HDD Model Name = HITACHI_DK23EA-40
HDD Serial Number = 8D4648
----Memory-----------------------
ATAPI Model Name= UJDA740 DVD/CDROM
Base Memory = 640 KB
Serial #: ( 32 bytes)
Extended Memory = 255MB
Asset Tag#: (32 bytes)
VGA Memory = 64 MB
UUID = (16 bytes)
Setup system date, time. Enable boot logo and get system information.