Filter
Top Products
104 Chapter 3
Replacing the WLAN Board
Replacing the DIMM Modules
3. Repeat with the second DIMM module if present.
1. Insert the WLAN board into the WLAN socket. 2. Replace the one (1) screw to secure the module.
3. Connect the two (2) antenna cables to the module.
NOTE: Cable placement is Black to the TR1 terminal (next to DIMM module) and White to the TR2 terminal
(closest to the edge of the chassis).
1. Insert the DIMM Module in place. 2. Press down to lock the DIMM module in place.