Aspire Digital 4625G Laptop User Manual


 
44 Chapter 2
Configuring UUID Values
1. Boot into DOS.
2. Run UUID.bat
Using the LAN MAC EEPROM Utility
You can use the MAC.BAT utility to write the MAC.CFG file to the EEPROM under DOS mode.
1. Use a text editor (for example: Notepad) to open the MAC.CFG file. You can see the MAC.CFG contents
as below:
WriteData= '001122334455' <------- MAC value
StartAddr=7A <------- MAC address
WriteLeng=6 <------- MAC value length
KeepByte=0 <------- can be any value
2. Boot into DOS.
3. Execute MAC.BAT to write MAC information to eeprom.
WriteData = ‘001122334455' MAC value
StartAddr=7A MAC address
WriteLeng=6 MAC value length
KeepByte=0 don’t care