Filter
Top Products
Chapter 3 61
Removing the WLAN Board Modules
1. See “Removing the Battery Pack” on page 54.
2. See “Removing the Lower Cover” on page 56.
3. “Removing the TV Tuner Board Modules” on page 58.
4. For Aspire 8730/8730Z Series, disconnect the three antenna cables from the WLAN board module.
NOTE: There are 3 antenna cables connected to the WLAN board module. The Black antenna cable is
connected to the connector #1, the White antenna cable is connected to connector #2 and the Gray
antenna cable is connected to connector #3.
5. For Aspire 8530 Series, remove the gray antenna that is taped to the board and disconnect the black and
white antenna cables from the WLAN board module.