Filter
Top Products
4-4
Chapter 4: BIOS Setup
8. Type <Y> and Press <Enter> to flash the new Bios file. NOTE: Do not
shut off system power or unplug the supply during the flash process.
9. The BIOS flashes and displays the results. Press <F1> to restart.
1. Boot from the floppy disk.
2. At the A:\ prompt, type C:\ then press <Enter>.
3. At the C:\ prompt, type AWDFLASH /qi BIOSFilename then <Enter> to
display the AWDFLASH screen.
4. Type the name of the new BIOS file, for example: “AW0702.BIN” then
press <Enter>. The program prompts if you want to save the previous
BIOS. Select <Y> to back-up the original BIOS in case you need to
reprogram it.
5. Follow steps 6 to 9 of the “Updating BIOS via the Built-in Award BIOS
Flash Utility.” section.
Updating BIOS via Bootable Floppy Disk