Filter
Top Products
5
AP2400R Hardware Reference Guide
Electrical Safety
Safet y Precautions
Safeguards
Observe the following safety precautions when you are connecting
or disconnecting any devices.
Operation Safety
Tools Required
You need a Philips (cross) screwdriver and a flat screwdriver to install
or remove the components in the server.
• Any operation on this server must be conducted by
certified or experienced engineers.
• Before operating your server, carefully read all the
manuals included with the server package.
• Before using the server, make sure all cables are correctly
connected and the power cables are not damaged. If any
damage is detected, contact your dealer as soon as
possible.
• To avoid short circuits, keep paper clips, screws, and
staples away from connectors, slots, sockets and circuitry.
• Before opening the chassis panels, make sure all power
cables are unplugged.
• Avoid dust, humidity, and temperature extremes. Place the
server on a stable surface.
• If the power supply is broken, do not try to fix it by
yourself. Contact an authorized dealer.
• It is recommended that you wear gloves when assembling
or dissembling the server to protect from cuts and
scrapes.
• When the server is powered on, heat sinks and the
surfaces of certain IC devices may be hot. Do not touch
them. Check whether the fans are functioning properly.
IMPORTANT