Asus P2B-L Mouse User Manual


 
ASUS P2B-L/P2B-S/P2B-LS User’s Manual 31
III. INSTALLATION
Connectors
III. INSTALLATION
12. IrDA-Compliant infrared module connector (5-pin IR)
This connector supports the optional wireless transmitting and receiving infrared
module. This module mounts to a small opening on system cases that support this
feature. You must also configure the setting through “UART2 Use Infrared” in
Chipset Features Setup to select whether UART2 is directed for use with COM2
or IrDA. Use the five pins as shown on the Back View and connect a ribbon cable
from the module to the motherboard according to the pin definitions.
R
Front View
P2B-L/S/LS Infrared Module Connector
For the infrared feature to be available,
you must connect the optional Infrared
(IrDA) module to the motherboard
+5V
IRRX
IRTX
(NC)
GND
+5V
IRTX
IRRX
(NC)
GND
Back View
13. SB-LINK™ Connector (6-1 pin SBLINK)
Using Intel’s PC-PCI technology, this connector allows Sound Blaster 16 com-
patibility to AWE64D (Digital) or compatible PCI audio cards, enabling users to
play Real-mode DOS games and multimedia applications.
R
P2B-L/S/LS SB-LINK™ Connector
SBLINK
NOTE: Pin 3 is removed to ensure the correct orientation
of the cable on it.
PC/PCI Grant Sideband Signal
DGND
PC/PCI Request Sideband Signal
DGND
Serial IRQ
12
65