Asus AT3IONT-I Computer Hardware User Manual


 
ASUS AT3IONT-I Series 1-12
3. USB connectors (10-1 pin USB78, USB910)
These connectors are for USB 2.0 ports. Connect the USB module cables to these
connectors, then install the module to a slot opening at the back of the system chassis.
These USB connectors comply with USB 2.0 specication that supports up to 480
Mbps connection speed.
AT3IONT-I DELUXE
AT3IONT-I SERIES USB2.0 connectors
PIN 1
USB+5V
USB_P8-
USB_P8+
GND
NC
USB+5V
USB_P7-
USB_P7+
GND
USB78
PIN 1
USB+5V
USB_P10-
USB_P10+
GND
NC
USB+5V
USB_P9-
USB_P9+
GND
USB910
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB module cable is purchased separately.
2. SATA power connector (4-pin SATA_PWR1) (for AT3IONT-I DELUXE only)
This connector is for SATA power cable. The power cable plug is designed to t this
connector in only one orientation. Find the proper orientation and push down rmly until
the connector completely t.
AT3IONT-I DELUXE
AT3IONT-I SERIES SATA power connector