Filter
Top Products
CRW-4012A User’s Manual
23
3. Press the drive eject button or lightly push the center of the drive tray
to replace the tray inside the drive.
Ejecting a Disc from the Drive
1. Press the eject button on the front of the drive to eject the tray.
2. Carefully remove the disc from the tray.
3. Press the drive eject button or lightly push the center of the drive tray
to load the tray back into the drive.
NOTE: If you are using a 12-cm disc, place it on the tray making
sure that it fits the outer circular border. This border helps hold the
disc in place. If you are using an 8-cm disc, place it on the inner
circular border on the tray.
12-cm Disc
8-cm Disc