ASUS CUV4X-CME User’s Manual 9
HARDWARE SETUP
Connectors
H/W SETUP
4) CPU Fan Connector (3-pin CPU_FAN)
The CPU fan connector supports cooling fans of 350mA (4.2 Watts) or less. The
fan wiring and plug may vary depending on the fan manufacturer. The red wire
should be positive while the black should be ground. Connect the fan plug to the
board taking into consideration the polarity of the connector.
5) USB Header (10-1 pin USBPORT) (optional)
If the USB port connectors on the back panel are inadequate, one USB header is
available for two additional USB port connectors. Connect the USB header to a
2-port USB connector set and mount the bracket to an open slot on the chassis.
(NOTE: The USB connector set does not come with the motherboard package.)
CUV4X-CME 12-Volt Cooling Fan Power
CPU_FAN
GND
NC
+12V
CUV4X-CME
CUV4X-CME Front Panel USB Header
USBPORT
GND
GND
P2+
P2-
USB PWR
USB PWR
P3-
P3+
GND
GND
15
610
CUV4X-CME