Filter
Top Products
54
ASUS Xonar D2X
For other applications that support ASIO, such as WaveLab, Cubase, Reason,
Winamp, etc, the setup will be very similar to the above.
No Item Description
1 Audio Options
Step 1 is to open the “Audio Options” window from the
Options tab.
2 Driver Mode
Step 2 is to select “ASIO” as the driver mode in Advanced
tab. (WDM and MME are Windows driver types) The
changes will take effect after you restart the program next
time.
3 Playback Timing
Master
After step 2, Sonar LE will display 4 output drivers: “ASUS
Xonar D2X ASIO Out -00~06”. Make sure you are using 00
or another one.
4 Recording Timing
Master
After step 2, Sonar LE will display 1 input driver: “ASUS
Xonar D2X ASIO In -00”. Make sure you are using it.
5 Sample Rate
Step 5 is to select the default file sample rate (44.1, 48, 96,
or 192KHz) for your Sonar project.
6 Bit-depth
Step 6 is to select the default file bit-depth (16/24bit) for your
project.
7 ASIO Panel
If you would like to configure bit-depth (16/24bit) and latency
(1ms~300ms) of the Xonar D2X ASIO driver, click this ASIO
panel to reset them. The changes will take effect the next
time you start the program.