Filter
Top Products
5-60 Chapter 5: RAID conguration
5.6.5 Viewing SAS topology
1. From the
Adapter Properties
screen, select
SAS Topology
.
Press <Alt+D> to display device properties, or <Alt+M> to display more keys.
2. Information about the volume and its member-disks are then displayed.
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item -/+ = Change Item
LSI Logic Cong Utility v6.16.00.00 (2007.05.07)
Adapter Properties -- SAS1068
Adapter SAS1068
PCI Slot 00
PCI Address(Bus/Dev/Func) 05.03.00
MPT Firmware Revision 1.15.00.00-IR
SAS Address 500E0180:60831008
NVIDIA Version 25.02
Status Disabled
Boot Order 0
Boot Support
(Enabled BIOS & OS)
RAID Properties
SAS Topology
Advanced Adapter Properties
More keys for the SAS Topology display:
C = Clear Device Mappings for Non-Present Devices
R = Refresh SAS Topology
Enter = On a SAS Enclosure or Expander - Expand or Collapse Item
Enter = On a Disk Drive - Turn on the Locate LED (next key press
turns off)
Esc=Exit F1=Help
Alt+D=Device Properties Alt+N=More Keys
LSI Logic Cong Utility v6.16.00.00 (2007.05.07)
SAS Topology -- SAS1068
Device Identier Device
SAS1068105:03:001 Info
﹂
Enclosure Direct Attach Devices Controller
﹂
Bay 0 RAID Physical Disk SAS
Bay 1 SEAGATE ST373454SS 0003 SAS
Bay 2 RAID Physical Disk SAS
Bay 3 RAID Physical Disk SAS
﹂
IS VOL LSILOGICLogical Volume 3000