Asus ET2411 Personal Computer User Manual


 
English
24 All-in-one PC ET2411/ ET2210 Series
Mounting to the wall
To mount your All-in-one PC to the wall, purchase an optional wall mount adapter and a wall
mount kit (VESA100 with pad and bracket). Install the wall mount components according to
the following instructions.
1
2
1. To release the stand, place the All-in-one PC
face-down first, resting the display panel on
aatevensurface.Liftthestandupwards.
Take off the back hatch by pressing and
lifting the clips.
2. Moving the stand again, press it
downwards. You can set the All-in-one PC
neartheedgeoftheatsurfacetoensure
that the stand goes all the way down.
Remove the four screws on the stand and
save for future reinstallation. Take out the
stand and put it aside.
2
3
1
3. Align the wall mount adapter to the holes
at the back of the All-in-one PC and secure
it with the four screws (M4 x 7L) provided.
2
2
1