Filter
Top Products
2-14 Chapter 2: RAID conguration
4. Use the arrow key to select the disk you would like to congure as hot spare,
then move the cursor to the Hot Spr column. Press <+>, <->, or <Space>.
The Drive Status column eld now shows Hot Spare.
Press <C> to commit the changes.
Synchronizing the array
Synchronizing the array allows the utility to resynchronize data on the mirrored disk
in the array. This procedure is seldom required because data synchronization is
automatically done during normal operation.
To synchronize the array:
1. Follow steps 1–3 of the section
Viewing volume properties and step 2 of
the section Managing hot spares.
2. From the
Manage Array screen select Synchronize Array, then press <Enter>.
3. Press <Y> to begin the synchronization, or <N> to cancel.
Esc = Exit Menu F1/Shift+1 = Help
SPACE/+/- = Change Item C = Commit Changes
LSI Corp Cong Utility v6.20.00.00 (2007.12.04)
Manage Hot Spare -- SAS1064E
Identier LSILOGICLogical Volume 3000
Type IME
Scan Order 0
Size(MB) 51498
Status Optimal
Slot Device Identier Hot Drive Pred Size
Num Spr Status Fail (MB)
0 SEAGATE ST336754SS 0003 [No] Ok No 34331
1 SEAGATE ST336754SS 0003 [No] Ok No 34331
2 SEAGATE ST336754SS 0003 [No] Ok No 34331
3 SEAGATE ST336754SS 0003
[Yes] Hot Spare No 35003
[----] --------- -- -----
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item
LSI Corp Cong Utility v6.20.00.00 (2007.12.04)
Manage Array -- SAS1064E
Identier LSILOGICLogical Volume 3000
Type IME
Scan Order 0
Size(MB) 51498
Status Optimal
Manage Hot Spare
Synnchronize Array
Activate Array
Delete Array