Asus M11BBUS009S Personal Computer User Manual


 
52 Chapter 6: Using the utilities
ENGLISH
ENGLISH
ENGLISH
ENGLISH
Updating the BIOS through a BIOS le
To update the BIOS through a BIOS le:
1. From the ASUS Update screen, select
Update BIOS from le, then click Next.
2. Locate the BIOS le from the Open window, click
Open, and click Next.
3. Click
Yes if you want to change the boot logo, which is the image appearing on screen
during the Power-On Self-Tests (POST). Otherwise, click No.
4. Follow the onscreen instructions to complete the update process.
MyLogo
ASUS MyLogo allows you to customize the boot logo. The boot logo is the image that
appears on screen during the Power-On Self-Tests (POST). ASUS MyLogo allows you to:
Change the current BIOS boot logo of your motherboard
Change the boot logo of a downloaded BIOS le and update this BIOS to your
motherboard
Change the boot logo of a downloaded BIOS le without updating this BIOS to your
motherboard
Ensure that the BIOS item Full Screen Logo is set to [Enabled] to display the boot logo.
See the section Boot Settings Conguration of the BIOS Setup chapter in the user manual.
Changing the BIOS boot logo
1. From the AI Suite II main menu bar, click
Update > MyLogo.
2. Select any of these three options, then click
Next:
Change the BIOS boot logo of my motherboard
Change the boot logo of a downloaded BIOS le and update this BIOS to my
motherboard
Change the boot logo of a downloaded BIOS le (But do not update this BIOS to
my motherboard)
Before using the last two options, ensure that you download a BIOS le to your computer
using ASUS Update.
3. Locate the picture le that you want to use as the boot logo (and the downloaded BIOS
if required) and then click Next.
4. Move the
Resolution slider or click Auto Tune for the system to automatically adjusts
the screen resolution.
5. Click the
Booting Preview button to preview the way the picture is displayed during
the POST. Left-click the mouse to return to the setting screen.
6. Click
Next when the adjustment is nished.
7. Click
Flash and follow the onscreen instructions to complete the process.