Asus M2N8-VMX Computer Hardware User Manual


  Open as PDF
of 90
 
2-22
Chapter 2: BIOS setup
Memclock Mode [Auto]
Select the DRAM Frequency programming method. If Auto, the DRAM
speed will be based on SPDs. If Limit, the DRAM speed will not exceed
the specied value. If Manual, the DRAM specied will be programmed
regardless.
Conguration options: [Auto] [Limit] [Manual]
MCT Timing Mode [Auto]
Conguration options: [Auto] [Manual]
Bank Interleaving [Disabled]
Enable or disable the Bank Memory Interleaving.
Conguration options: [Disabled] [Auto]
Enable Clock to All DIMMs [Disabled]
Enable or disable the Unused Clocks to DIMMs Even Memory Slots are
not populated.
Conguration options: [Disabled] [Enabled]
MemCLK Tristate C3/ATLVID [Disabled]
Enable or disable the MemCLK Tri-Stating during C3 and Alt VID.
Conguration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Enable or disable the Memory Remapping Around Memory Hole.
Conguration options: [Disabled] [Enabled]
Memory Conguration
Memclock Mode [Auto]
MCT Timing Mode [Auto]
Bank Interleaving [Disabled]
Enable Clock to ALL DIMMs [Disabled]
MemCLK Tristate C3/ATLVID [Disabled]
Memory Hole Remapping [Enabled]
Memory Configuration
 previous next