Asus MAXIMUSVIGENEMICROATX Computer Hardware User Manual


 
ASUS CROSSHAIR V FORMULA-Z
3-11
Chapter 3
ADDR/CMD drive strength [Auto]
Conguration options: [Auto] [1x] [1.25x] [1.5x] [2x]
MEMCLK drive strength [Auto]
Conguration options: [Auto] [1x] [1.25x] [1.5x] [2x]
Data drive strength [Auto]
Conguration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DQS drive strength [Auto]
Conguration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
Processor ODT [Auto]
Conguration options: [Auto] [240 ohms +/- 20%] [120 ohms +/- 20%]
[80 ohms +/- 20%] [60 ohms +/- 20%]
address/command setup time [Auto]
Conguration options: [Auto] [1/2 MEMCLK DELAY(1 1/2 MEMCLK DELAY for 2T
timing)] [1 MEMCLK DELAY(2 MEMCLK DELAY for 2T timing)]
address/command fine delay [Auto]
Conguration options: [Auto] [0/64 MEMCLK DELAY] – [31/64 MEMCLK DELAY]
CS/ODT setup time [Auto]
Conguration options: [Auto] [1/2 MEMCLK DELAY] [1 MEMCLK DELAY]
CS/ODT fine delay [Auto]
Conguration options: [Auto] [0/64 MEMCLK DELAY] – [31/64 MEMCLK DELAY]
CKE setup time [Auto]
Conguration options: [Auto] [1/2 MEMCLK DELAY] [1 MEMCLK DELAY]
CKE fine delay [Auto]
Conguration options: [Auto] [0/64 MEMCLK DELAY] – [31/64 MEMCLK DELAY]
GPU.DIMM Post
The sub-items in this menu display the status of the installed VGA cards and memory. The
elds show N/A if there are no devices installed on the slots.
DIGI+ Power Control
CPU Load-Line Calibration [Auto]
Load-line is dened by AMD VRM spec and affects CPU voltage. The CPU working voltage
will decrease proportionally to CPU loading. Higher load-line calibration would get higher
voltage and better overclocking performance, but increase the CPU and VRM thermal. This
item allows you to adjust the voltage range from the following percentages to boost the
system performance: 0% (Regular), 25% (Medium), 50% (High), 75% (Ultra High) and 100%
(Extreme).
Conguration options: [Auto] [Regular] [Medium] [High] [Ultra High] [Extreme]
The actual performance boost may vary depending on your CPU speciation.