Asus P1-AH2 Personal Computer User Manual


 
4-7
ASUS Pundit P1-AH2
5. USB connector (10-1 pin USB56)
These connectors are for USB 2.0 ports. Users can connect a USB/
GAME module cable to the connectors, then install the module to a
slot opening at the back of the system chassis. These USB connectors
comply with USB 2.0 specification that supports up to 480 Mbps
connection speed.
4. CPU Fan connectors (3-pin CPU_FAN)
The fan connectors support cooling fans of 350 mA~740 mA (8.88
W max.) or a total of 1 A~2.22 A (26.64 W max.) at +12V. Connect
the fan cables to the fan connectors on the motherboard, making
sure that the black wire of each cable matches the ground pin of the
connector.
Do not forget to connect the fan cables to the fan connectors.
Insufficient air flow inside the system may damage the motherboard
components. These are not jumpers! Do not place jumper caps on the
fan connectors!
R
CPU Fan Connector
CPU_FAN1
GND
+12V
Tachometer
R
USB56
USB+5V
USB_P6
USB_P6
GND
NC
USB+5V
USB_P5
-
USB_P5
+
GND
-
+
1
USB 2.0 Connector