Asus P2B-LS Mouse User Manual


 
ASUS P2B-L/P2B-S/P2B-LS User’s Manual 79
IX. ADAPTEC EZ-SCSI UTILITY
IX. EZ-SCSI UTILITY
Intro/Quick Start
Welcome to Adaptec EZSCSIVI, ADAPTEC EZ-SCSI UTILITY. Adaptec EZSCSI
gives you what you need to use your SCSI devices most effectively with DOS,
Windows
®
3.1x, or Windows for Workgroups 3.1x.
Quick Start Instructions
First, install SCSI devices (see the hardware documentation for details). Then fol-
low the instructions for your operating system software in one of the following sec-
tions. We recommend that after you install Adaptec EZSCSI you run SCSITutor to
learn more about the features of SCSI.
Windows95 or WindowsNT
If you want to install Windows95 or WindowsNT on a new computer system, you
may not be able to access your SCSI CDROM drive at first. (Usually, you install
Windows95 and WindowsNT from a CDROM disc.) To gain access to your CDROM
drive, follow the DOS Quick Start instructions below.
Windows/Windows for Workgroups 3.1x
1. Install Windows 3.1x or Windows for Workgroups 3.1x and start it running on
your computer.
2. Insert the Adaptec EZSCSI Setup Disk into your floppy disk drive.
3. Select File/Run from the Program Manager menu.
4. When the Run dialog box appears, type a:\setup if you are using the A drive or
b:\setup if you are using the B drive. Then click OK.
5. Follow the onscreen instructions.
DOS
1. Install DOS 6.x or later and start it running on your computer.
2. Insert the Adaptec EZSCSI Setup Disk into your floppy disk drive.
3. At the DOS prompt, type a:\install (assuming your 3.5” floppy is A: drive).
Then press <Enter>.
4. Follow the onscreen instructions.