Filter
Top Products
34 ASUS P2B-L/P2B-S/P2B-LS User’s Manual
Connectors
III. INSTALLATION
III. INSTALLATION
23. ATX Power Supply Connector (20-pin ATXPWR)
This connector connects to a ATX power supply. The plug from the power sup-
ply will only insert in one orientation because of the different hole sizes. Find
the proper orientation and push down firmly but gently making sure that the pins
are aligned.
R
P2B-L/S/LS ATX Power Connector
+3.3Volts
-12.0Volts
Ground
PWR Supply On
Ground
Ground
Ground
-5.0 Volts
+5.0 Volts
+5.0 Volts
Power Good
+12.0Volts
+3.3 Volts
+3.3 Volts
Ground
+5.0 Volts
Ground
+5.0 Volts
Ground
+5V Standby
IMPORTANT: Make sure that your ATX power supply can supply at least 10mA
on the 5-volt standby lead (5VSB). For motherboards with the onboard LAN
chipset, your ATX power supply must supply at least 720mA to the +5Volt
standby power. You may experience difficulty in powering on your system if
your power supply cannot support the load.