Asus P2B-VM Computer Hardware User Manual


 
68 ASUS P2B-VM User’s Manual
B. Other Video Drivers
System Information (optional)
The program will check the system for possible conflicts with the device, and dis-
play both the device and system configurations in the INFO BOX. In case of a
conflict, it will issue a warning and suggest possible corrective actions.
Your onboard video device is PCI Plug-and-Play compatible: your system will au-
tomatically allocate system resources and resolve possible conflicts between your
Plug-and-Play compatible video device and other expansion cards.
System Information
Quick Setup (optional)
Select Quick Setup to configure the video device to work with your monitor. As you
highlight each monitor, the display specifications for that monitor type are listed in
the INFO BOX. Proper monitor selection is necessary for correct resolution and
refresh rate operation. You have four options to choose a correct Monitor Type.
Selecting Your Monitor Type: Factory Default/Apple.../IBM.../MIT.../NEC.../
VESA-Std.../Generic.../Read VDIF.../Custom...
Select Read VDIF... If you have a VDIF file for your monitor and wish to use its
parameters to automatically configure the video device. Additional VDIF details are
provided later in this chapter, in the section: VDIF Files
Select Custom... if none of the above applies to you, or you wish to manually con-
figure the settings. Please refer to the information provided later in this chapter in
the section: Custom Configuration
Notes On Refresh Rates:
A higher refresh rate reduces screen flicker, and therefore reduces eye strain.
Not all refresh rates are supported at all color depths. Refer to the features
section for specifications of your onboard video device.
The resolution used by your software application is independent of the refresh rate.
Resolution depends on the installed software driver and selected display mode.
B. Other Video Drivers
System Information