ASUS Terminator P4 533 Barebone System
41
3.5 System memory
The motherboard has two Double Data Rate (DDR) DIMM sockets that
supports up to 2GB unbuffered non-ECC PC2700/2100/1600 DDR
DIMMs.
A DDR DIMM has the same physical dimensions as an SDR DIMM, but it
has a 184-pin footprint compared to the 168-pin of the SDR DIMM. Also, a
DDR DIMM is single notched while an SDR DIMM is double notched.
Therefore, a DDR DIMM is not backward compatible with SDR, and should
be installed only in a socket specially designed for DDR DIMMs.
NOTE
Refer to section “2.5 Install system memory” for instructions on
installing DDR DIMMs.
3.5.1 Memory configurations
You may install any DDR DIMMs with 64MB, 128MB, 256MB, 512MB, and
1GB densities into the three DIMM sockets.
Use the following combinations to install DDR DIMMs.
DIMM Location 184-pin DDR DIMM Total Memory
Socket 1 (Rows 0&1) 64MB, 128MB, 256MB, 512MB, 1GB x1 =
Socket 2 (Rows 2&3) 64MB, 128MB, 256MB, 512MB, 1GB x1 =
Total system memory (Max. 2GB) =
P4SC-E
®
P4SC-E 184-Pin DDR DIMM Sockets
80 Pins104 Pins