Filter
Top Products
ASUS P4SGX-MX motherboard user guide
1-21
11. System panel connector (20-pin PANEL1)
This connector accommodates several system front panel functions.
P4SGX-MX
®
P4SGX-MX System Panel Connectors
PANEL1
* Requires an ATX power supply.
PLED
Ground
IDELED-
PWR
+5VSB
+5V
Speaker
Speaker
Connector
Power LED
Ground
IDELED+
Reset SW
SMI Lead
IDE_LED
ExtSMI#
Ground
Reset
Ground
Ground
ATX Power
Switch*
Ground
• System Power LED Lead (3-1 pin PLED)
This 3-1 pin connector connects to the system power LED. The LED lights up
when you turn on the system power, and blinks when the system is in sleep
mode.
• System Warning Speaker Lead (4-pin SPEAKER)
This 4-pin connector connects to the case-mounted speaker and allows you to
hear system beeps and warnings.
• System Management Interrupt Lead (2-pin SMI)
This 2-pin connector allows you to manually place the system into a suspend
mode, or “green” mode, where system activity is instantly decreased to save
power and to expand the life of certain system components. Attach the case-
mounted suspend switch to this 2-pin connector.
• ATX Power Switch / Soft-Off Switch Lead (2-pin PWRBTN)
This connector connects a switch that controls the system power. Pressing the
power switch turns the system between ON and SLEEP, or ON and SOFT
OFF, depending on the BIOS or OS settings. Pressing the power switch while
in the ON mode for more than 4 seconds turns the system OFF.
• Reset Switch Lead (2-pin RESET)
This 2-pin connector connects to the case-mounted reset switch for rebooting
the system without turning off the system power.
• Hard Disk Activity Lead (2-pin IDE_LED)
This connector supplies power to the hard disk activity LED. The read or write
activities of any device connected to the primary or secondary IDE connector
cause this LED to light up.