Filter
Top Products
4-19
華碩 P5KC 主機板使用手冊
DRAM Static Read Control [Auto]
設定值有：[Auto] [Disabled] [Enabled]。
DRAM Dynamic Write Control [Auto]
設定值有：[Auto] [Disabled] [Enabled]。
Transaction Booster [Auto]
設定值有：[Auto] [Disabled] [Enabled]。
Booster level [0]
本項目只有在 Transaction Booster 設定為 [Enabled] 時才會出現。設定值
有：[0] [1]。
Clock Over-Charging Mode [Auto]
設定值有：[Auto] [700mV] [800mV] [900mV] [1000mV]。
CPU Spread Spectrum [Auto]
本項目用來啟動或關閉展頻時脈產生器（clock generator spread spectrum）。
設定值有：[Auto] [Disabled]。
PCIE Spread Spectrum [Auto]
本項目用來啟動或關閉 PCIE 展頻功能。設定值有：[Auto] [Disabled]。
CPU Voltage [Auto]
本項目可以選擇 CPU 的電壓值。設定值有：[Auto] [1.7000V] [1.6875V]
[1.6750V] [1.6625V] [1.6500V] [1.6375V] [1.6250V] [1.6125V] [1.6000V]
[1.5875V] [1.5750V] [1.5625V] [1.5500V] [1.5375V] [1.5250V] [1.5125V]
[1.5000V] [1.4875V] [1.4750V] [1.4625V] [1.4500V] [1.4375V] [1.4250V]
[1.4125V] [1.4000V] [1.3875V] [1.3750V] [1.3625V] [1.3500V] [1.3375V]
[1.3250V] [1.3125V] [1.3000V] [1.2875V] [1.2750V] [1.2625V] [1.2500V]
[1.2375V] [1.2250V] [1.2125V] [1.2000V] [1.1875V] [1.1750V] [1.1625V]
[1.1500V] [1.1375V] [1.1250V] [1.1125V] [1.1000V]。
在您設定 CPU 的核心電壓前，請先詳閱您所安裝之 CPU 的相關
技術文件，設定過高的核心電壓值可能對 CPU 造成損害；設定過
低的電壓值可能會造成系統不穩定。
CPU Voltage Reference [Auto]
設定值有：[Auto] [0.63x] [0.61x] [0.59x] [0.57x]。
CPU Voltage Damper [Auto]
設定值有：[Auto] [Enabled]。
CPU PLL Voltage [Auto]
設定值有：[Auto] [1.50V] [1.70V]。