2-24 Chapter 2: Hardware information
For WiFi-AP Edition Only:
Refer to the WiFi-AP Solo user guide for detail conguration and settings.
9. Wireless LAN port
. This port is on the onboard wireless LAN module that
allows you to set up a wireless network and exchange information with other
wireless devices without tagling cables and wires. Connect the moveable
omni-directional antenna to this port.
10. Wireless LAN Activity LED
. The wireless module comes with an activity
LED.
11. Microphone port (pink).
This port connects a microphone.
12. Side Speaker Out port (gray).
This port connects the side speakers in an
8-channel audio conguration.
13. USB 2.0 ports 1 and 2.
These 4-pin Universal Serial Bus (USB) ports are
available for connecting USB 2.0 devices.
14. External SATA port 1/2. These port connect to an external a Serial ATA
hard disk drive. To congure a RAID0, RAID1, or JBOD set, connect external
Serial ATA hard disk drives to the External SATA port 1 and 2.
Refer to the audio conguration table below for the function of the audio ports in
2, 4, 6, or 8-channel conguration.
Audio 2, 4, 6, or 8-channel conguration
Port Headset
2-channel
4-channel 6-channel 8-channel
Light Blue Line In Line In Line In Line In
Lime Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Pink Mic In Mic In Mic In Mic In
Orange – – Center/Subwoofer Center/Subwoofer
Black – Rear Speaker Out Rear Speaker Out Rear Speaker Out
Gray – – – Side Speaker Out
The external SATA port supports
external Serial ATA 3.0 Gb/s
devices. Longer cables support
higher power requirements to
deliver signal up to two meters
away, and enables improved hot-
swap function.