ASUS P5LD2-FM/DH/VP 2-3
2.1.2 ASUS EZ Flash utility
The ASUS EZ Flash feature allows you to update the BIOS without having
to go through the long process of booting from a oppy disk and using
a DOS-based utility. The EZ Flash utility is built-in the BIOS chip so it is
accessible by pressing <Alt> + <F2> during the Power-On Self Tests
(POST).
To update the BIOS using EZ Flash:
1. Visit the Fujitsu Siemens Computers website (www.fujitsu-siemens.com) to
download the latest BIOS le for the motherboard and rename the same to
P5LD2FMDH.ROM.
2. Save the BIOS le to a oppy disk, then restart the system.
EZFlash starting BIOS update
Checking for oppy...
4. Insert the oppy disk that contains the BIOS le to the oppy disk
drive. When the correct BIOS le is found, EZ Flash performs the BIOS
update process and automatically reboots the system when done.
EZFlash starting BIOS update
Checking for oppy...
Floppy found!
Reading le “P5LD2FMDH.ROM”. Completed.
Start erasing.......|
Start programming...|
Flashed successfully. Rebooting.
• Do not shutdown or reset the system while updating the BIOS to prevent system
boot failure!
• A “Floppy not found!” error message appears if there is no oppy disk in the
drive. A “P5LD2FMDH.ROM not found!” error message appears if the correct BIOS
le is not found in the oppy disk. Make sure that you rename the BIOS le to
P5LD2FMDH.ROM.