Filter
Top Products
5-34 Chapter 5: Software support
5.5 Creating a RAID driver disk
A oppy disk with the RAID driver is required when installing Windows
®
2000/XP
operating system on a hard disk drive that is included in a RAID set.
To create a RAID driver disk:
1. Place the motherboard support DVD into the DVD-ROM drive.
2. Select Make Disk tab.
3. From the Make Disk menu, select the RAID driver disk you want to create or
browse the contents of the support DVD to locate the driver disk utility.
Refer to section “5.2.4 Make Disk menu” for details.
4. Insert oppy disk to oppy disk drive.
5. Follow succeeding screen information to complete process.
6. Write-protect the oppy disk to avoid computer virus infection.
To install the RAID driver:
1. During the OS installation, the system prompts you to press the F6 key to
install third-party SCSI or RAID driver.
2. Press <F6> then insert the oppy disk with RAID driver into the oppy disk
drive.
3. Follow the succeeding screen instructions to complete the installation.
Due to chipset limitation, the Serial ATA ports supported by the NVIDIA chipset
doesn’t support Serial Optical Disk Drives (Serial ODD) under DOS.