Filter
Top Products
ASUS P5N-D 4-31
4.5.3 APM Conguration
Restore on AC Power Loss [Power-Off]
Allows you to enable or disable the Restore on AC Power Loss function.
Configuration options: [Power-Off] [Power-On] [Last State]
PWR Button < 4 secs [Instant-Off]
When set to [Instant-Off], the system goes into Soft-off mode after you press the
power button for less than 4 seconds. When set to [Suspend], the system goes
into Suspend mode after you press the power button for less than 4 seconds.
Configuration options: [Suspend] [Instant-Off]
Power Up On PCI/PCIE Devices [Disabled]
Allows you to enable or disable the PME to wake up from S5 by PCI/PCIE devices
and the NVIDIA
®
onboard LAN. Configuration options: [Disabled] [Enabled]
Power On By External Modem [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer
when the external modem receives a call while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the first
try. Turning an external modem off and then back on while the computer is off
causes an initialization string that turns the system power on.
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item
is set to [Enabled], the items Date (of Month) Alarm and Alarm Time (hh:mm)
become user-configurable with set values.
Configuration options: [Disabled] [Enabled]
Select Menu
Item Specic Help
Press [Enter] to
select whether or not
to restart the system
after AC power loss
APM Conguration
Restore on AC Power Loss [Power-Off]
PWR Button < 4 secs [Instant-Off]
Power Up On PCI/PCIE Devices [Disabled]
Power On By External Modems [Disabled]
Power On by RTC Alarm [Disabled]
x Date(of Month) Alarm 0
x Alarm Time(hh:mm) 0 : 0 : 0
HPET Support [Enabled]
Power Up By PS/2 Mouse [Disabled]
Power Up By PS/2 Keyboard [Disabled]
Phoenix-Award BIOS CMOS Setup Utility
Power
F1:Help : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit : Select Menu Enter: Select SubMenu F10: Save and Exit