3-28 Chapter 3: BIOS setup
3.5.4 Onboard Devices Conguration
High Denition Audio [Enabled]
Allows you to enable or disable the High Denition Audio Controller. The following
items appear only when you enable this item.
Conguration options: [Enabled] [Disabled]
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy
AC’97 or high-denition audio depending on the audio standard that the front
panel audio module supports. Conguration options: [AC97] [HD Audio]
SPDIF_OUT Mode Setting [SPDIF Output]
Set to [HDMI Output] if the VGA card has HDMI output and needs to use
SPDIF signal from the SPDIF_OUT header.
Conguration options: [SPDIF Output] [HDMI Output]
Marvell IDE [Enabled]
Allows you to enable or disable the onboard Marvell IDE controller.
Conguration options: [Enabled] [Disabled]
PCIE IDE Boot ROM [Enabled]
This item appears only when you set the previous item to [Enabled].
Conguration options: [Enabled] [Disabled]
Atheros GigaBit LAN [Enabled]
Allows you to enable or disable the onboard Gigabit LAN controller.
Conguration options: [Enabled] [Disabled]
LAN Boot ROM [Disabled]
This item appears only when you set the previous item to [Enabled].
Conguration options: [Disabled] [Enabled]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
Onboard Devices Conguration
High Denition Audio [Enabled]
Front Panel Type [HD Audio]
SPDIF_OUT Mode Setting [SPDIF Output]
Marvell IDE [Enabled]
Marvell IDE Boot ROM [Enabled]
Atheros GigaBit LAN [Enabled]
LAN Boot ROM [Disabled]
LSI Firewire 1394 [Enabled]
Serial Port1 Address [3F8/IRQ4]
Enable or Disable
High Denition Audio
Controller
BIOS SETUP UTILITY
Advanced