Asus P8H61-M LX3 Computer Hardware User Manual


  Open as PDF
of 65
 
ASUS P8H61-M LX3 Series1-20
• For a fully congured system, we recommend that you use a power supply unit (PSU)
that complies with ATX 12 V Specication 2.0 (or later version) and provides a minimum
power of 350 W.
•
DO NOT forget to connect the 4-pin ATX +12V power plug. Otherwise, the system will
not boot up.
• We recommend that you use a PSU with higher power output when conguring a
system with more power-consuming devices. The system may become unstable or may
not boot up if the power is inadequate.
•
If you are uncertain about the minimum power supply requirement for your system,
refer to the Recommended Power Supply Wattage Calculator at http://support.asus.
com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
2. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to t these connectors in only one orientation. Find the proper orientation and
push down rmly until the connectors completely t.
P8H61-M LX3 Series
P8H61-M LX3 Series ATX power connectors
EATXPWR
PIN 1
GND
+5 Volts
+5 Volts
+5 Volts
-5 Volts
GND
GND
GND
PSON#
GND
-12 Volts
+3 Volts
+3 Volts
+12 Volts
+12 Volts
+5V Standby
Power OK
GND
+5 Volts
GND
+5 Volts
GND
+3 Volts
+3 Volts
ATX12V
PIN 1
+12V DC
+12V DC
GND
GND
3. Intel
®
H61 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1~4)
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via
Serial ATA 3.0 Gb/s signal cables.
• You must install Windows
®
XP Service Pack 3 or later version before using Serial ATA
hard disk drives.
• When using hot-plug and NCQ, set the SATA Mode item in the BIOS to [AHCI Mode].
See section 2.5.4 SATA Conguration for details.
P8H61-M LX3 Series
P8H61-M LX3 Series Intel
®
SATA 3.0Gb/s connectors
S
AT
A3G_
4
G
N
D
R
SATA_R
XP
4
R
SATA_R
XN
4
G
N
D
R
SA
TA_T
X
N
4
R
SATA
_
TX
P
4
G
N
D
S
AT
A3G_
2
G
N
D
R
SATA
_
TX
P
2
R
SA
T
A_TX
N
2
G
N
D
R
SATA_R
XN
2
R
S
A
TA
_R
X
P
2
G
N
D
S
AT
A3G_
3
G
N
D
R
SATA
_
R
XP
3
R
SATA
_
R
XN
3
G
N
D
R
SATA_T
X
N
3
R
SATA_T
X
P
3
G
N
D
S
AT
A3G_
1
G
N
D
R
SATA
_
TX
P
1
R
SA
T
A_
TX
N
1
G
N
D
R
SA
TA_R
XN
1
R
S
A
TA
_R
X
P
1
G
N
D
 previous next