Asus P8Z77-V LK Computer Hardware User Manual


 
ASUS P8Z77-V LK 2-23
Chapter 2
7. USB 3.0 connector (20-1 pin USB3_34)
These connectors are for the additional USB 3.0 ports, and complies with the USB 3.0
specicaton that supports up to 480 MBps connection speed. If the USB 3.0 front panel
cable is available from your system chassis, with this USB 3.0 connector, you can have
a front panel USB 3.0 solution.
You can connect the ASUS front panel USB 3.0 bracket to this connector to obtain the front
panel USB 3.0 solution.
8. Intel
®
Z77 Serial ATA 3.0 Gb/s connectors (7-pin SATA3G_1–4 [blue])
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical disc drives
via Serial ATA 3.0 Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
conguration with the Intel
®
Rapid Storage Technology through the onboard Intel
®
Z77
chipset.
These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode].
Refer to section 3.5.3 SATA Conguration for details.
When using NCQ, please check the SATA Mode in the BIOS is [AHCI Mode]. Refer to
3.5.3 SATA Conguration for details.
You must install Windows
®
XP Service Pack 3 or later versions before using Serial ATA
hard disk drives. The Serial ATA RAID feature is available only if you are using Windows
®
XP SP3 or later versions.
Before creating a RAID set, refer to .section 4.5 RAID Congurations or the manual
bundled in the motherboard support DVD.
P8Z77-V LK
P8Z77-V LK USB3.0 Front panel connector
USB3_34
P8Z77-V LK
P8Z77-V LK SATA 3.0Gb/s connectors
S
AT
A3G_
4
G
N
D
R
SATA
_
R
XP
4
R
SATA_R
XN
4
G
N
D
R
SATA_T
X
N
4
R
SATA
_
TX
P
4
G
N
D
S
AT
A3G_
3
G
N
D
R
SA
TA_R
XP
3
R
SA
TA_R
XN
3
G
N
D
R
SATA
_
TX
N
3
R
SATA
_
TX
P
3
G
N
D
S
AT
A3G_
2
G
N
D
R
SATA
_
R
XP
2
R
SATA_R
XN
2
G
N
D
R
SATA_T
X
N
2
R
SATA_T
X
P
2
G
N
D
S
AT
A3G_
1
G
N
D
R
SA
TA_R
XP
1
R
SA
TA
_
R
XN
1
G
N
D
R
SATA
_
TX
N
1
R
SATA
_
TX
P
1
G
N
D